Rocketfish RF-WHTIB-A Receiver Wireless Audio Module Chip Replacement

はじめに

A sender that is unresponsive in connection mode may indicate a problem with the wireless connection chip within the device. Replacing a faulty chip can help restore the device's function. This guide will help users replace a faulty wireless module chip indicated by an unresponsive connection between the sender and receiver devices.

必要な工具と部品

手順1 How to Open the Rocketfish RF-WHTIB-A Receiver

Rocketfish RF-WHTIB-A Receiver Wireless Audio Module Chip Replacement, How to Open the Rocketfish RF-WHTIB-A Receiver: 手順 1、 1の画像 1

Remove the 4 rubber tabs on the bottom side of the receiver.

編集

手順2

Unscrew the four 12 mm screws on the bottom side of the receiver.
Use a Phillips #1 screwdriver for this step.

編集

手順3

Remove top casing from the receiver.
The receiver top casing is difficult to remove. Internal clasps may have to be broken in order to remove the top casing (this will not effect the device's function)

編集

手順4 Receiver Wireless Audio Module Chip

Rocketfish RF-WHTIB-A Receiver Wireless Audio Module Chip Replacement, Receiver Wireless Audio Module Chip: 手順 4、 1の画像 1

Unscrew the 10 mm screw holding the wireless audio module.

編集

手順5

Slide the black retaining flap securing the ribbon cable away from the white bar.
There should be only a small space between the white bar and black retaining flap.
You may want to use tweezers for this step.