メインコンテンツにスキップ
リペアコミュニティに参加 - アカウントの作成

Replacement Ram

必要な工具と部品

  1. Replacement Ram, Ram: 手順 1、 1の画像 1
    • Turn the laptop upside down. Locate a removable cover, that is screwed shut near the front right of the laptop which is upside down.

    FixBotに聞いてみる

    コメントを追加

  2. Replacement Ram: 手順 2、 1の画像 1
    • After removing the screw, using your finger slowly lift out and remove the cover.

    FixBotに聞いてみる

    コメントを追加

  3. Replacement Ram: 手順 3、 3の画像 1 Replacement Ram: 手順 3、 3の画像 2 Replacement Ram: 手順 3、 3の画像 3
    • Lift the flap

    • Locate two connectors on both ends of the short end. This will release the ram, if properly done the long end should slightly lift.

    • The ram is to be removed at a 45 degree angle.

    FixBotに聞いてみる

    コメントを追加

  4. Replacement Ram: 手順 4、 1の画像 1
    • Pull out cleanly and you have now successfully removed the ram.

    FixBotに聞いてみる

    コメントを追加

終わりに

To reassemble your device, follow these instructions in reverse order.

キャンセル: このガイドを終了できませんでした。

ある他の人がこのガイドを完成しました。

作成者

3人の作成者と共同で作成されました。

Eric Martinez

メンバー登録日: 02/14/17

667 ポイント

6のガイドは作成済み

チーム

USF Tampa, Team 20-5, Remmell Spring 2017 USF Tampa, Team 20-5, Remmell Spring 2017人のメンバー

USFT-REMMELL-S17S20G5

3 メンバー

12のガイドは作成済み

0件のガイドコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 21

今までの合計 631