はじめに

The shutter switch is the button which is to be pressed when the user wants to capture an image. If for some reason this switch needs to be replaced, this guide will be showing how to remove the shutter switch.

パーツ

パーツは必要ありません。

Begin by opening the top of the camera (flash assembly) to a slight angle.
  • Begin by opening the top of the camera (flash assembly) to a slight angle.

  • Next, angle the flash assembly slightly upward and pry off the connections carefully.

  • Be careful not to damage the ribbon cable. This is essential to the operation of the flash.

Lens Replacement Guide - Steps 5 through 8 need titles

Step 6 - remove first bullet

Step 2 - 3 need titles

Add titles to all steps of all guides

Primary lens replacement guide

Step 4 is not a step review titles for all steps.

hani - 返信

Proofread your guides carefully.

Dan Brown - 返信

Slide the action button, on the bottom of the camera, to open the bottom.
  • Slide the action button, on the bottom of the camera, to open the bottom.

コメントを追加する

  • Insert the blue plastic opening tool between the rear case and the plastic tabs directly under the shelf, and pry it loose.

  • Pull off the face plate.

コメントを追加する

  • After the face plate is off, the shutter switch should slide out easily.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Tyler OBrien

メンバー登録日: 2014年09月22日

501 ポイント

2のガイドは作成済み

チーム

USF Tampa, Team 3-5, Brown Fall 2014 USF Tampa, Team 3-5, Brown Fall 2014人のメンバー

USFT-BROWN-F14S3G5

3 メンバー

6のガイドは作成済み

コメント1件

where did you get the replacement parts for this?

Jacob Sokolove - 返信

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 6

過去 30 日: 47

今までの合計 1,449