メインコンテンツにスキップ

はじめに

If you need to replace the film roller, access the inside of the camera using this guide. You may need to replace the roller if the pictures are jammed or if the roller is broken. For this guide you will not need to do any difficult steps, but you will need tweezers.

ツール

パーツ

パーツは指定されていません。

  1. Polaroid OneStep 2 Film roller Replacement, Film roller: 手順 1、 1の画像 1
    • Pull the hinge button over to open the camera.

  2. Polaroid OneStep 2 Film roller Replacement: 手順 2、 2の画像 1 Polaroid OneStep 2 Film roller Replacement: 手順 2、 2の画像 2
    • Remove the left and right springs with a pair of tweezers.

  3. Polaroid OneStep 2 Film roller Replacement: 手順 3、 1の画像 1
    • Lift out the top roller. The gold and black pieces will remain attached to the roller.

終わりに

To reassemble your device, follow these instructions in reverse order.

12 の人々がこのガイドを完成させました。

Abby Boucher

メンバー登録日: 2018年09月10日

784 ポイント

5のガイドは作成済み

チーム

University of Alabama, Team S1-G1, Bedsole Fall 2018 University of Alabama, Team S1-G1, Bedsole Fall 2018人のメンバー

UA-BEDSOLE-F18S1G1

4 メンバー

5のガイドは作成済み

7 件のコメント

Hi @abbyboucher Thanks a lot for the tutorial! Do you know where can I find the spare parts like the rollers, springs or the small plastics parts that are around?My Onestep+ fell to the ground and I lost some of those small parts.

Thanks

Joe

Joe Var - 返信

Thank you so much for this tutorial! I couldn’t find a place that would fix my camera and I literally just bought it a month ago! Already gutted that I couldn’t bring it on my Christmas holiday, I almost gave up when repair shops told me I would have to contact Polaroid.. thank you so so much!

drummagal7 - 返信

thank you very very muttz

stinka007 - 返信

any tips to put the springs back in place after taking one out?

ekw664 - 返信

also struggling with this. Any tips?

Edward McLaughlin -

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 29

過去 30 日: 186

今までの合計 12,446