はじめに

This guide will inform you on installing a new battery cartridge.

  • Please note that we did not have a battery cartridge to insert into the camera.
  1. Open the bottom compartment of the camera by sliding the lever towards the opening. Open the bottom compartment of the camera by sliding the lever towards the opening. Open the bottom compartment of the camera by sliding the lever towards the opening.
    • Open the bottom compartment of the camera by sliding the lever towards the opening.

  2. Pro Tech ツールキットを含むご注文、もしくは総額 $100ドル以上のご注文については送料無料です。

    当社のショップを閲覧する
  3. Remove old battery/ film cartridge from camera.
    • Remove old battery/ film cartridge from camera.

  4. Follow the instructions that came with the new battery/ film cartridge to insert the new cartridge into the camera.
    • Follow the instructions that came with the new battery/ film cartridge to insert the new cartridge into the camera.

    • Close the battery compartment of the camera.

    • Note: The camera in this picture does not contain a battery.

ゴール

11 の人々がこのガイドを完成させました。

Doug Jimenez

メンバー登録日: 2010年01月21日

457 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 16-31, Maness Winter 2010 Cal Poly, Team 16-31, Maness Winter 2010人のメンバー

CPSU-MANESS-W10S16G31

4 メンバー

4のガイドは作成済み

It worked but its expensive

Jessica diaz - 返信

I put new film in, it´s turning on, the flash is going off, but no film is coming out after the flash. What is the problem?

tristanmoeller2013 - 返信

nothing happened

new film installed

no sound

no flash

no action

eminickstone - 返信

I'm having the same issue

Marie -

I'm having same issue.

Marie -

コメントを追加する

統計データを表示:

過去 24時間: 12

過去 7 日: 107

過去 30 日: 457

今までの合計 117,341