メインコンテンツにスキップ

Polaroid Automatic 100 Bottom Frame Spring Replacement

必要な工具と部品

  1. Polaroid Automatic 100 Bottom Frame Spring Replacement, Bottom Frame Spring Replacement: 手順 1、 3の画像 1 Polaroid Automatic 100 Bottom Frame Spring Replacement, Bottom Frame Spring Replacement: 手順 1、 3の画像 2 Polaroid Automatic 100 Bottom Frame Spring Replacement, Bottom Frame Spring Replacement: 手順 1、 3の画像 3
    • Fully extend the bellows to prevent collapse using the #1 tab.

    • Remove the camera cover in order to make the camera easier to work with.

    • When collapsing bellows, press down on the metal frame above the bellows.

  2. Polaroid Automatic 100 Bottom Frame Spring Replacement: 手順 2、 1の画像 1
    • Remove the Phillips #0 6mm screw on the shutter mount and the washers using a size 5 nut driver.

  3. Polaroid Automatic 100 Bottom Frame Spring Replacement: 手順 3、 1の画像 1
    • Unscrew the 4.5 mm Phillips screw on the right with a Phillips #0 Screwdriver.

  4. Polaroid Automatic 100 Bottom Frame Spring Replacement: 手順 4、 3の画像 1 Polaroid Automatic 100 Bottom Frame Spring Replacement: 手順 4、 3の画像 2 Polaroid Automatic 100 Bottom Frame Spring Replacement: 手順 4、 3の画像 3
    • Remove the spring from the shutter mount.

    • The hooks on the ends of the spring within the shutter mount may recoil when being removed, and may be sharp enough to puncture skin.

    • When reassembling, getting the smaller screw on the right hand side can be challenging. It may be helpful to tip the camera upside down so that gravity helps the screw fall into place.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

4人の作成者と共同で作成されました。

Katie Miller

メンバー登録日: 04/14/15

680 ポイント

5のガイドは作成済み

チーム

Cal Poly, Team 4-3, Maness Spring 2015 Cal Poly, Team 4-3, Maness Spring 2015人のメンバー

CPSU-MANESS-S15S4G3

4 メンバー

6のガイドは作成済み

コメント 1 件

Thank you so very much!!!

You saved my camera and my sanity!!!!

CAROL HOLDER - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 7

今までの合計 1,074