メインコンテンツにスキップ

パーツ

パーツは指定されていません。

  1. Remove the three screws running along the back edge of case cover. Then, remove the two screws from each side of case cover.
    • Remove the three screws running along the back edge of case cover.

    • Then, remove the two screws from each side of case cover.

  2. Grab edges of cover. Pull outward, slightly, then straight up.
    • Grab edges of cover. Pull outward, slightly, then straight up.

  3. Lift up the five tabs securing the front panel to the chassis. There are three on the bottom, and two on the inside edges of the panel. Panel should then lift off the player. Lift up the five tabs securing the front panel to the chassis. There are three on the bottom, and two on the inside edges of the panel. Panel should then lift off the player.
    • Lift up the five tabs securing the front panel to the chassis. There are three on the bottom, and two on the inside edges of the panel. Panel should then lift off the player.

  4. Grip jogger dial and lift up. It should come off easily. Grip jogger dial and lift up. It should come off easily.
    • Grip jogger dial and lift up. It should come off easily.

  5. Remove 4 mounting screws as shown. Unscrew and save brass tab. Push in 2 plastic retainers and lift out.
    • Remove 4 mounting screws as shown.

    • Unscrew and save brass tab.

    • Push in 2 plastic retainers and lift out.

終わりに

To reassemble your device, follow these instructions in reverse order.

Kevin

メンバー登録日: 2011年04月26日

354 ポイント

8のガイドは作成済み

チーム

Cal Poly, Team 18-20, Garner Spring 2011 Cal Poly, Team 18-20, Garner Spring 2011人のメンバー

CPSU-GARNER-S11S18G20

4 メンバー

11のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 2,106