はじめに

Follow this guide if the battery is dysfunctional and you want to replace it.

パーツ

パーツは必要ありません。

On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.
  • On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.

コメントを追加する

Use the T6 Torx Screwdriver to remove all 4 screws. You have to first remove the Stylus to  access the 4th screw.
  • Use the T6 Torx Screwdriver to remove all 4 screws.

  • You have to first remove the Stylus to access the 4th screw.

コメントを追加する

Using a plastic opening tool, carefully separate the front and back cases. Note: The antenna will detach from the phone.
  • Using a plastic opening tool, carefully separate the front and back cases.

  • Note: The antenna will detach from the phone.

コメントを追加する

Using metal tweezers, unplug small white plug. Pulling the white plug will disconnect the battery. Make sure the phone is off before you do this step.
  • Using metal tweezers, unplug small white plug.

  • Pulling the white plug will disconnect the battery. Make sure the phone is off before you do this step.

コメントを追加する

Slide the flat side of the spudger under the battery and gently dislodge the battery by lifting the spudger up.
  • Slide the flat side of the spudger under the battery and gently dislodge the battery by lifting the spudger up.

  • The battery may be glued to the phone.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Clement Poisson

メンバー登録日: 2010年01月26日

24 ポイント

14のガイドは作成済み

チーム

Cal Poly, Team 13-23, Maness Winter 2010 Cal Poly, Team 13-23, Maness Winter 2010人のメンバー

CPSU-MANESS-W10S13G23

4 メンバー

16のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 6

今までの合計 4,881