はじめに

Follow this guide to learn how to replace your non-functioning button pad.

パーツ

パーツは必要ありません。

  1. Keep track of all pieces removed from the device.
    • Keep track of all pieces removed from the device.

    • Gently pull off the device cover. The cover snaps on and off easily where the cover attaches to the Palm IIIc device

    コメントを追加する

  2. Using a Phillips head screw driver, take out the four screws on the back of the device. You may have to pull them out with your hands once they are unscrewed.
    • Using a Phillips head screw driver, take out the four screws on the back of the device. You may have to pull them out with your hands once they are unscrewed.

    • There will be two long screws and two short screws. The long screws come from the top of the device, and the short screws come from the bottom of the device.

    コメントを追加する

    • Lay Palm IIIc face-up and remove the front cover.

    • Do this firmly but not with too much force so as to not break or disturb anything you're not supposed to.

    コメントを追加する

    • Using a prying tool, carefully pop button pad out of the cover.

    コメントを追加する

    • Insert the new button pad where the old one used to be.

    コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Paulina Trujillo

メンバー登録日: 2011年04月07日

241 ポイント

9のガイドは作成済み

チーム

Cal Poly, Team 20-69, Walters Spring 2011 Cal Poly, Team 20-69, Walters Spring 2011人のメンバー

CPSU-WALTERS-S11S20G69

5 メンバー

9のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 1,234