はじめに

If the shutter button on your camera has stopped functioning, use this guide to remove the old one and install a new button.

Locate the 3 screws on the outer metal band and remove them with a #00 Phillips screwdriver.
  • Locate the 3 screws on the outer metal band and remove them with a #00 Phillips screwdriver.

コメントを追加する

Use the spudger to peel off the outer metal band, starting from the bottom of the camera.
  • Use the spudger to peel off the outer metal band, starting from the bottom of the camera.

  • The metal band it attached to the camera with glue in addition to screws. Be careful not to bend the band when removing it from the camera.

コメントを追加する

  • The shutter button can now be removed. It is not connected to the camera and can be lifted off.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Rory Aronson

メンバー登録日: 2010年04月15日

34 ポイント

6のガイドは作成済み

チーム

Cal Poly, Team 6-13, Maness Spring 2010 Cal Poly, Team 6-13, Maness Spring 2010人のメンバー

CPSU-MANESS-S10S6G13

5 メンバー

9のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 1

今までの合計 2,907