はじめに

Splitting the case of the Mifi 2200 is necessary to be able access the internal parts. This is how to go about that.

パーツ

パーツは必要ありません。

Remove the rear cover by pressing down on the cover and pulling it away from the device.
  • Remove the rear cover by pressing down on the cover and pulling it away from the device.

コメントを追加する

Place your finger on the back of the battery located near the edge of the device.
  • Place your finger on the back of the battery located near the edge of the device.

  • Push your finger into the battery and lift up to pop the battery out of the device.

コメントを追加する

  • Using a metal spudger, pry open the device around the seam between the front and back cover.

  • It may be difficult to split apart, so use force with caution.

  • It may seem like you are breaking the device, but you will only be breaking the adhesive lining that keeps the device sealed.

コメントを追加する

  • Once the seal has been broken all the way around, open the cases using your hands.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Justin Russo

メンバー登録日: 2012年04月15日

196 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team 7-36, Maness Spring 2012 Cal Poly, Team 7-36, Maness Spring 2012人のメンバー

CPSU-MANESS-S12S7G36

5 メンバー

5のガイドは作成済み

コメント1件

If case gets damaged, is there a place to but the case

Snehraj Merchant - 返信

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 5

今までの合計 1,364