はじめに

This guide will teach you how to open up your flash safely and replace the flash pin that holds the flash upright.

Turn off the camera and remove the battery.
  • Turn off the camera and remove the battery.

コメントを追加する

Pry the flash open using the plastic opening tool.
  • Pry the flash open using the plastic opening tool.

コメントを追加する

Remove the two Phillips #0 3.0 mm screws from the front of the flash compartment using the small Phillips Head screwdriver.
  • Remove the two Phillips #0 3.0 mm screws from the front of the flash compartment using the small Phillips Head screwdriver.

コメントを追加する

Pry off the back plastic of the flash compartment using the plastic opening tool. When it is time to reassemble the flash module, a certain amount of force and precise alignment will be required.
  • Pry off the back plastic of the flash compartment using the plastic opening tool.

  • When it is time to reassemble the flash module, a certain amount of force and precise alignment will be required.

コメントを追加する

On the left of the camera you will see a metal spring. Unscrew the Phillips #0 3.0 mm screw holding the spring in place, using the small Phillips Head screwdriver.
  • On the left of the camera you will see a metal spring.

  • Unscrew the Phillips #0 3.0 mm screw holding the spring in place, using the small Phillips Head screwdriver.

コメントを追加する

Remove metal spring and replace with new spring.
  • Remove metal spring and replace with new spring.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Lindsey Chase

メンバー登録日: 2014年01月21日

173 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team 6-19, Maness Winter 2014 Cal Poly, Team 6-19, Maness Winter 2014人のメンバー

CPSU-MANESS-W14S6G19

4 メンバー

6のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 2

過去 7 日: 4

過去 30 日: 32

今までの合計 2,395