Remove the screw located near the speaker port using a Phillips 00 screwdriver.
  • Remove the screw located near the speaker port using a Phillips 00 screwdriver.

コメントを追加する

Turn camera upside down so that the battery compartment is facing you.
  • Turn camera upside down so that the battery compartment is facing you.

  • Remove all four screws from the bottom of the camera with a Phillips 00 screwdriver.

コメントを追加する

  • Rotate the camera to the opposite side where the A/V outlet is located.

  • Unscrew and remove all four screws with a Phillips 00 screwdriver.

コメントを追加する

  • Turn the camera so that the Wi-Fi adapter is facing you.

  • Unscrew and remove all four screws with a Phillips 00 screwdriver.

コメントを追加する

  • Using a plastic opening tool, pry the front casing of the camera.

  • Continue this motion all around the front casing of the camera.

  • Gently pull apart the front casing from the rest of the camera.

コメントを追加する

  • Using the plastic opening tool pry the back casing of the camera.

コメントを追加する

  • Orange ribbon is fragile

  • Carefully pull apart the back casing of the camera from the front of the camera without tearing the orange ribbon.

コメントを追加する

  • Pull down the on the black latch to carefully separate the orange ribbon from the motherboard.

  • Pull apart the orange ribbon and front casing from the rest of the camera.

コメントを追加する

  • Use plastic opening tool to carefully pry the LCD Screen from the camera.

コメントを追加する

  • Gently pull the ribbon cable down to release the latch, then pull up to remove it from the motherboard.

コメントを追加する

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Joshua Avery

メンバー登録日: 2012年01月23日

7 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team 3-28, Amido Winter 2012 Cal Poly, Team 3-28, Amido Winter 2012人のメンバー

CPSU-AMIDO-W12S3G28

4 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 980