メインコンテンツにスキップ

はじめに

Have you ever brought nail clippers on a trip, only to find that they had fallen apart in your bag. Before buying a new pair, try fixing them with this simple guide. As long as you have all three necessary parts, if you follow these easy steps your nail clippers will be as good as new.

  1. Insert the rod through the bottom hole of the clipper body, and continue through the top hole. The side of the rod with the notch should be inserted first. Note: The top of the clipper body will often have a pick/file attached to it. If no pick/file is present, either side can serve as the top or the bottom.
    • Insert the rod through the bottom hole of the clipper body, and continue through the top hole.

    • The side of the rod with the notch should be inserted first.

    • Note: The top of the clipper body will often have a pick/file attached to it. If no pick/file is present, either side can serve as the top or the bottom.

  2. Compress the body of the clippers to reveal the notch.
    • Compress the body of the clippers to reveal the notch.

  3. Rotate the rod until the notch opening faces away from the body.
    • Rotate the rod until the notch opening faces away from the body.

    • This allows for easier completion of the following step.

  4. Place the hole of the lever into the revealed rod notch. Release the compressed nail clipper body to lock the lever into place. Note: Position of the lever does not matter at this point.
    • Place the hole of the lever into the revealed rod notch.

    • Release the compressed nail clipper body to lock the lever into place.

    • Note: Position of the lever does not matter at this point.

  5. Swivel the lever into its normal position, and test the nail clippers' functionality. Swivel the lever into its normal position, and test the nail clippers' functionality. Swivel the lever into its normal position, and test the nail clippers' functionality.
    • Swivel the lever into its normal position, and test the nail clippers' functionality.

まとめ

If you follow these steps, your nail clippers should be back to working order.

28 の人々がこのガイドを完成させました。

Robert Weber

メンバー登録日: 2015年04月09日

914 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team 30-5, Green Spring 2015 Cal Poly, Team 30-5, Green Spring 2015人のメンバー

CPSU-GREEN-S15S30G5

5 メンバー

19のガイドは作成済み

Thank you so much ! My fingers are arthritic and I was frustrated until I found your instructions.

marvin - 返信

Thank you. Knew it was simple! Love this website.

jonathanl.aguiar - 返信

This is the dumbest “repair guide” I have ever seen. It is not a repair, because they are not broken, it’s a re-assembly.

Albert E - 返信

Thank you so much!!!! I could only find one pair in my house and was feeling desperate. This is the best guide to repair and I’m glad you posted under broken nail clippers because that’s what I considered mine to be and how I looked it up.

Tanya Bishop - 返信

I used you steps, but whenever I try to rotate the handle so that I can clip my nails the handle just pops off again.

Arianna Gessaman - 返信

コメントを追加する

統計データを表示:

過去 24時間: 27

過去 7 日: 80

過去 30 日: 473

今までの合計 29,723