はじめに
This guide will teach you the inner workings of both the motor and cord. You will need to know how to use a screwdriver as well as pliers. Make sure to familiarize yourself with the basics of crimping.
必要な工具と部品
-
-
-
Remove the highlighted screws shown with a Phillips #2 Screwdriver.
FixBotに聞いてみる
-
-
-
Remove the motor from the motor mounting plate. Pull the motor and cord to the side.
-
-
-
-
Open the crimp by pressing it opposite to how the crimp was pressed. Repeat for second crimp.
-
-
-
Untwist the brown and the silver wire by gripping the tip and unwinding them. Do the same for the second wire.
-
-
-
Separate the cord and motor.
-
Now, depending on whether the cord or the motor was broken, head to the device page to order a new one.
-
-
To reassemble your device, follow these instructions in reverse order.
チーム
USF Tampa, Team 1-3, Sullivan Fall 2015 USF Tampa, Team 1-3, Sullivan Fall 2015人のメンバー
USFT-SULLIVAN-F15S1G3
3 メンバー
17のガイドは作成済み
