はじめに
Use this guide to remove the black covers protecting the mouse's white click button pieces.
必要な工具と部品
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
16 の人々がこのガイドを完成させました。
チーム
Eastern Washington University, Team S1-G1, Ramos Winter 2018 Eastern Washington University, Team S1-G1, Ramos Winter 2018人のメンバー
EWU-RAMOS-W18S1G1
4 メンバー
15のガイドは作成済み
6 件のコメント
you have to buy new ones… i’m more concerned of using pliers to take the switch apart, when ideally you should desolder it and replace it with a proper omron switch (not made in china)
He is only removing the cover, not the whole button. But doing it with pliers is skipping that it has two clips, one at each end and you could damage the board just twisting and pulling
What do you do after step 5? And that copper spring looks wrong. It shouldn’t look like that. The correct positioning is this: https://community.pcgamingwiki.com/galle...
