メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

はじめに

Looking to replace your fan? This guide will help you do so with only a couple steps.

パーツ

パーツは指定されていません。

  1. Flip the device over so the back is facing up.
    • Flip the device over so the back is facing up.

  2. Remove the four 5mm screws from the back of the device using a Phillips #00 screwdriver. There is a screw located under the battery; lift the battery up to access it.
    • Remove the four 5mm screws from the back of the device using a Phillips #00 screwdriver.

    • There is a screw located under the battery; lift the battery up to access it.

  3. Manta Driver Kit

    どんな修理にでも対応可能な112ビット

    Upgrade Your Toolbox

    Manta Driver Kit

    Upgrade Your Toolbox
  4. Once all four screws are removed, lift the back off. Once all four screws are removed, lift the back off.
    • Once all four screws are removed, lift the back off.

  5. Remove the  three 5 mm screws from the fan with a Phillips #00 screwdriver. Remove the  three 5 mm screws from the fan with a Phillips #00 screwdriver.
    • Remove the three 5 mm screws from the fan with a Phillips #00 screwdriver.

  6. Pull the wire on the bottom left of the fan out of the socket. Pull the wire gently; pulling too hard could damage the wire. Pull the wire gently; pulling too hard could damage the wire.
    • Pull the wire on the bottom left of the fan out of the socket.

    • Pull the wire gently; pulling too hard could damage the wire.

  7. Remove the fan. Remove the fan.
    • Remove the fan.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Zoey Calcagno

メンバー登録日: 2018年10月04日

636 ポイント

5のガイドは作成済み

チーム

Linn Benton Community College, Team S1-G4, Karnes Fall 2018 Linn Benton Community College, Team S1-G4, Karnes Fall 2018人のメンバー

LBCC-KARNES-F18S1G4

4 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 23

過去 30 日: 59

今までの合計 638