はじめに

These steps show how to remove the phone's front case. This allows access to many of the components located on the outer face of the phone.

Remove the four grey plugs using either tweezers or a push pin.
  • Remove the four grey plugs using either tweezers or a push pin.

コメントを追加する

Remove the four screws that are now exposed using a Phillips #00 screwdriver.
  • Remove the four screws that are now exposed using a Phillips #00 screwdriver.

  • Be sure to put the screws in a safe place as they are very small and easy to lose.

コメントを追加する

  • Once all the screws have been removed, use a plastic opener tool to pry the case from the rest of the phone.

  • Insert the opener tool into the seem between the case and the phone. Apply pressure to separate the two pieces.

  • Do this across the entire length of the seem until the case is no longer attached to the phone.

コメントを追加する

  • The case can now be removed and the interior of the front is accessible.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Ryan Bishop

メンバー登録日: 2012年04月17日

1 ポイント

6のガイドは作成済み

チーム

Cal Poly, Team 12-39, Regan Spring 2012 Cal Poly, Team 12-39, Regan Spring 2012人のメンバー

CPSU-REGAN-S12S12G39

3 メンバー

16のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 677