メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

Use this guide to replace the front cover.

パーツ

パーツは指定されていません。

  1. Have the camera facing upwards and the flash closest to you.
    • Have the camera facing upwards and the flash closest to you.

    • Unscrew the two 6.2 mm Phillips screws on the top half of the camera.

  2. Flip the camera over to the other side-with flash farthest from you.
    • Flip the camera over to the other side-with flash farthest from you.

    • Unscrew top two 6.2mm Phillips screws on this side.

  3. Turn the camera so the bottom is facing up with the front-facing away.
    • Turn the camera so the bottom is facing up with the front-facing away.

    • Unscrew the 6.2mm Phillips screw on the top right.

    • The front cover is now unscrewed and should be lifted evenly and removed.

終わりに

To reassemble your device, follow these instructions in reverse order.

Michelle

メンバー登録日: 2011年04月04日

86 ポイント

5のガイドは作成済み

チーム

Cal Poly, Team 25-28, Garner Spring 2011 Cal Poly, Team 25-28, Garner Spring 2011人のメンバー

CPSU-GARNER-S11S25G28

4 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 1

過去 30 日: 5

今までの合計 1,783