はじめに
When the lights are displaying improperly, usually replacing the LED lights will fix the problem.
必要な工具と部品
-
-
Use a plastic opening tool to pry around the edges of the circular rubber panel.
-
-
-
-
Take out the four 9mm black PH0 screws from the top and bottom of the device.
-
Pull off cap by hand.
-
The outer casing can now be removed.
-
-
-
Remove the tape around the cables on the top of the device.
-
Remove the cables by lifting up on the black bracket and then pulling the cable out.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
2 の人々がこのガイドを完成させました。