メインコンテンツにスキップ
リペアコミュニティに参加 - アカウントの作成

How to start a new guide

  1. How to start a new guide, Get into the guide maker: 手順 1、 1の画像 1
    • Click Fix Your Stuff, then click Repair guides. You should see this screen. Then Click Create a Guide.

  2. How to start a new guide, Setup Part 1: 手順 2、 1の画像 1
    • 2: Add your device in Device, on "What part are you replacing", type what you are replacing. and type a title. If you click Show More, you can type an introduction.

  3. How to start a new guide, Setup Part 2: 手順 3、 1の画像 1
    • Fill out the remaining setup, these are not necesarry but these help you be more specific:

    • Time Estimate: You can set the amount of time required to fix this product

    • Difficulty estimate: The difficulty estimate shown is Moderate, which is the default estimate. Can be configured to set a difficulty.

    • Prerequisite guides: Sometimes devices have hidden "prerequisite-only" guides that can be placed into your guide to avoid writing tons of steps. Also, you can use the the back cover/screen replacement guides as a starting Prerequisite. All prerequisites have to be in order.

    • Tools and Parts: You can add tools and/or parts to your guide.

    • Conclusion: Give the reader after-repair instructions.

終わりに

Your'e all done setting up your guide! You can start posting steps.

redratchet21

メンバー登録日: 01/29/26

1,599 ポイント

12のガイドは作成済み

0件のガイドコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 8

今までの合計 28