Hamilton Beach 51101BA Power Cord Replacement

はじめに

In this guide you are going to learn how to take out the current power cord in order to replace it with a new one.

必要な工具と部品

手順1 Power Cord

Hamilton Beach 51101BA Power Cord Replacement, Power Cord: 手順 1、 3の画像 1

Hamilton Beach 51101BA Power Cord Replacement, Power Cord: 手順 1、 3の画像 2

Hamilton Beach 51101BA Power Cord Replacement, Power Cord: 手順 1、 3の画像 3

Remove container from base.
Hold the blender and the container, then twist the container in a clockwise motion.
Make sure to follow the lock and unlock markings on the container.

翻訳

手順2

Turn the blender so the bottom is facing you.
Using a Phillips #2 screwdriver, remove the two 5 mm Phillips screws from the base.

翻訳

手順3

Lift the two wires from the motor platform.

翻訳

手順4

Using the wire cutters, cut the end of the thick black wires.

翻訳

終わりに

To reassemble your device, you must solder the new power cord to the thin black and thin gray wires, and follow the steps in reverse order. Requires soldering skills.

ある他の人がこのガイドを完成しました。