はじめに
After using this guide you will have learned how to replace the power button to your blender. You will need to use basic tools and soldering to complete this guide.
必要な工具と部品
-
-
Remove the container from the base.
-
Hold the blender and the container, then twist the container in a clockwise motion.
FixBotに聞いてみる
-
-
-
Turn the blender so the bottom is facing you.
-
Using a Phillips #2 screwdriver, remove the two 5 mm Phillips screws from the base.
-
-
-
-
Using a Phillips #2 screwdriver, remove the two 5 mm Phillips screws from the motor platform.
-
-
-
On the back of the power button, desolder the red and grey wires that are connected to the piece.
-
To reassemble your device, follow these instructions in reverse order.
2 の人々がこのガイドを完成させました。
チーム
USF Tampa, Team 2-5, Sullivan Fall 2015 USF Tampa, Team 2-5, Sullivan Fall 2015人のメンバー
USFT-SULLIVAN-F15S2G5
4 メンバー
6のガイドは作成済み
