パーツ

パーツは必要ありません。

Identify the black air concentrating nozzle.
  • Identify the black air concentrating nozzle.

コメントを追加する

Remove the black air concentrating nozzle by gently twisting and pulling the nozzle.
  • Remove the black air concentrating nozzle by gently twisting and pulling the nozzle.

コメントを追加する

Using a screwdriver, remove the screw located underneath the air concentrating nozzle. This screw attaches the hair dryer body to the hair dryer grating.
  • Using a screwdriver, remove the screw located underneath the air concentrating nozzle. This screw attaches the hair dryer body to the hair dryer grating.

  • The purpose of this guide is to demonstrate the repair steps for a generic hair dryer. We do not specify screw sizes because screw sizes can differ between hair dryers. For most hair dryers, use a Phillips #1 Screwdriver. For hair dryers with smaller screws, consider using a Phillips #00 Screwdriver.

コメントを追加する

Detach the hair dryer grating from the body by gently twisting the grating from side to side.
  • Detach the hair dryer grating from the body by gently twisting the grating from side to side.

コメントを追加する

Separate the hair dryer grating into the three pieces seen in the image.
  • Separate the hair dryer grating into the three pieces seen in the image.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Mitch

メンバー登録日: 2012年10月04日

28 ポイント

5のガイドは作成済み

チーム

Cal Poly, Team 24-29, Regan Fall 2012 Cal Poly, Team 24-29, Regan Fall 2012人のメンバー

CPSU-REGAN-F12S24G29

5 メンバー

6のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 6

過去 30 日: 19

今までの合計 1,285