はじめに

The navigation keys are the hard, directional keys on the front of the phone.

The qwerty keyboard are the soft keys on the front of the phone.

パーツ

パーツは必要ありません。

First, flip the phone over so that the back is facing you.
  • First, flip the phone over so that the back is facing you.

コメントを追加する

Next, using both thumbs, carefully push the back side of the phone's exterior up, removing it from the main section of the phone.
  • Next, using both thumbs, carefully push the back side of the phone's exterior up, removing it from the main section of the phone.

  • Set this piece aside until you need to reassemble the phone.

コメントを追加する

  • Insert thumb and pointer finger into the notch above the battery. Pull the battery away from the rest of the phone and set it aside.

コメントを追加する

  • To remove the back casing inside the phone, unscrew the 6 screws that are around the perimeter of the phone.

コメントを追加する

  • Carefully pull off back casing.

  • Warning: This can be difficult, but just start pulling the back out from the front shell. As it starts to lift up, continue moving around the phone until the whole back becomes free.

コメントを追加する

  • Next unscrew the top screw.

  • Warning: Be CAREFUL because the LCD screen is still attached to the front side of the motherboard by a flexible ribbon cable.

コメントを追加する

  • Pull the plastic keyboard away from the front case.

コメントを追加する

  • To remove the navigation keys on the front of the phone, unscrew the four screws circled using a Philips screwdriver.

  • Remove the navigation keys from the front of the phone. They should pop out as a unit.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Luke Plewa

メンバー登録日: 2011年04月22日

116 ポイント

4のガイドは作成済み

チーム

Cal Poly, Team 25-29, Garner Spring 2011 Cal Poly, Team 25-29, Garner Spring 2011人のメンバー

CPSU-GARNER-S11S25G29

3 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 1,507