メインコンテンツにスキップ

HTC One Max Fingerprint Sensor Replacement

必要な工具と部品

  1. HTC One Max Fingerprint Sensor Replacement, Back Case: 手順 1、 1の画像 1
    • Lift back cover while pressing highlighted release switch towards the center of the phone.

  2. HTC One Max Fingerprint Sensor Replacement: 手順 2、 2の画像 1 HTC One Max Fingerprint Sensor Replacement: 手順 2、 2の画像 2
    • Remove the four white stickers in each corner that cover the Tri-Wing screws.

    • Remove the white sticker near the buttons that control the volume.

    • Remove the white sticker near the SIM card.

    • Remove the big white sticker with the bar-code in the center of the phone.

  3. HTC One Max Fingerprint Sensor Replacement: 手順 3、 1の画像 1
    • Remove the thirteen Tri-Wing Y00 screws (Upper & Lower screws are 5 mm length, middle screws are 3.8 mm length) from the back case.

    • Disconnect the cable near the volume buttons.

  4. HTC One Max Fingerprint Sensor Replacement: 手順 4、 2の画像 1 HTC One Max Fingerprint Sensor Replacement: 手順 4、 2の画像 2
    • Use the small plastic opening tool to pry between the screen and the rear case.

  5. HTC One Max Fingerprint Sensor Replacement, Fingerprint Sensor: 手順 5、 2の画像 1 HTC One Max Fingerprint Sensor Replacement, Fingerprint Sensor: 手順 5、 2の画像 2
    • Use Tweezers to disconnect the ribbon cable connecting the fingerprint sensor to the motherboard.

    • When replacing the fingerprint sensor, make sure the ribbon cable snaps into the port on the motherboard.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

5人の作成者と共同で作成されました。

Andrey Sklyar

メンバー登録日: 09/23/14

452 ポイント

2のガイドは作成済み

チーム

USF Tampa, Team 11-3, Blackwell Fall 2014 USF Tampa, Team 11-3, Blackwell Fall 2014人のメンバー

USFT-BLACKWELL-F14S11G3

4 メンバー

7のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 3

今までの合計 1,255