メインコンテンツにスキップ

HP ProOne 600 G1 Wi-Fi Adapter Replacement

必要な工具と部品

  1. HP ProOne 600 G1 Wi-Fi Adapter Replacement, Back Removal: 手順 1、 2の画像 1 HP ProOne 600 G1 Wi-Fi Adapter Replacement, Back Removal: 手順 1、 2の画像 2
    • Push the unlock tabs on the back of the monitor in and towards each other while sliding the back cover up.

  2. HP ProOne 600 G1 Wi-Fi Adapter Replacement: 手順 2、 2の画像 1 HP ProOne 600 G1 Wi-Fi Adapter Replacement: 手順 2、 2の画像 2
    • Loosen the two 1/2" screws , with the T15 Torx Screwdriver, on each side of the stand. Remove stand.

  3. HP ProOne 600 G1 Wi-Fi Adapter Replacement: 手順 3、 1の画像 1
    • Take out the single 3/8" screw, with the T15 Torx Screwdriver, from the middle of the backplate.

  4. HP ProOne 600 G1 Wi-Fi Adapter Replacement: 手順 4、 1の画像 1
    • Remove the backplate by pulling it back towards you.

    • Small plastic tabs hold in the backplate, pull these up to remove it.

  5. HP ProOne 600 G1 Wi-Fi Adapter Replacement, Wi-Fi Adapter: 手順 5、 2の画像 1 HP ProOne 600 G1 Wi-Fi Adapter Replacement, Wi-Fi Adapter: 手順 5、 2の画像 2
    • Locate the Wi-Fi adapter at the top right corner of where the stand once was.

    • Unscrew the screws using the Philips #1 Screwdriver.

  6. HP ProOne 600 G1 Wi-Fi Adapter Replacement: 手順 6、 1の画像 1
    • Remove wire tabs from the left side of the Wi-Fi adapter.

    • Remove the adapter

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

5人の作成者と共同で作成されました。

Janelle Layman

メンバー登録日: 10/01/15

258 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 1-20, Maness Fall 2015 Cal Poly, Team 1-20, Maness Fall 2015人のメンバー

CPSU-MANESS-F15S1G20

4 メンバー

12のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 31

今までの合計 3,865