パーツ

パーツは必要ありません。

  1. Flip the device over so that the bottom side is facing up and use the Phillips #1 Screw Driver to remove the four 4mm screws on the cover panel. Lift the panel to remove it from the device.
    • Flip the device over so that the bottom side is facing up and use the Phillips #1 Screw Driver to remove the four 4mm screws on the cover panel.

    • Lift the panel to remove it from the device.

  2. Free shipping on all orders over $100.00 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  3. Remove the RAM by placing your thumbs on the silver tabs on each side of the RAM stick and pulling the tabs away from the RAM stick. The RAM stick should "flip" up when it is released from its holders. Pull the RAM stick toward you to remove it.
    • Remove the RAM by placing your thumbs on the silver tabs on each side of the RAM stick and pulling the tabs away from the RAM stick.

      • The RAM stick should "flip" up when it is released from its holders.

    • Pull the RAM stick toward you to remove it.

    • Repeat the above step to remove the second RAM stick

まとめ

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Marshall Reid

メンバー登録日: 2014年04月14日

473 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team 12-38, Maness Spring 2014 Cal Poly, Team 12-38, Maness Spring 2014人のメンバー

CPSU-MANESS-S14S12G38

4 メンバー

5のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 3

今までの合計 382