リペアコミュニティに参加 - アカウントの作成

はじめに

If your device is frequently overheating or making excessive noise, especially during compute intensive tasks, it may be due to a malfunctioning or dirty fan. This guide will show you how to replace the fan in the HP EliteBook 8530w laptop in the hopes of alleviating these issues.

必要な工具と部品

1. 手順1 Battery
  Turn the laptop off then place it down so that the back is facing up.
  
  Slide the battery release switch to the left and hold it there.
  編集
  
  FixBotに聞いてみる
  
  コメントを追加
  
  1024
2. 手順2
  Pull the battery away upward and away from the laptop while continuing to hold the release switch.
  
  Once the battery is removed from the laptop, you may release the switch.
  
  To properly dispose of your battery, look for the closest location that accepts electronic waste in your area and drop it off there.
  編集
  
  FixBotに聞いてみる
  
  コメントを追加
  
  1024
1. 手順3 Fan
  Unscrew the two screws from the center panel with a Phillips #00 screwdriver.
  
  These screws should have a keyboard icon stamped next to them.
  編集
  
  FixBotに聞いてみる
  
  コメントを追加
  
  1024
2. 手順4
  Flip the laptop over then open the lid.
  
  Slide the four tabs at the top of the keyboard towards you with your finger.
  
  Wedge a finger or spudger in the top corner of the keyboard and hinge it forward to reveal the backside.
  
  Do not try to pull the keyboard out of the laptop. There are still cables connected to it that can easily be damaged.
  編集
  
  FixBotに聞いてみる
  
  コメントを追加
  
  1024
3. 手順5
  この手順で使用する道具：
  Tweezers
  $4.99
  
  購入する
  Use a Torx TR7 screwdriver to remove the three screws holding down the fan.
  
  Gently remove the fan connector that plugs into the motherboard.
  
  Note: It can help to use something like tweezers to remove the connector if you are having trouble.
  
  Remove the fan.
  編集
  
  FixBotに聞いてみる
  
  コメントを追加
  
  1024