はじめに

To remove the mounting post, you must take out all internal parts in front of the mounting post. Push down on the spring that is holding the mounting post in place. When the spring is compressed, both the mounting post and the spring can be removed if you push them away from the outside casing.

パーツ

パーツは必要ありません。

Flip the GravityLight on its back and place it on a sturdy surface. Unscrew the three 2cm Phillips #00 screws on the back of the GravityLight’s body.
  • Flip the GravityLight on its back and place it on a sturdy surface.

  • Unscrew the three 2cm Phillips #00 screws on the back of the GravityLight’s body.

コメントを追加する

Some of the internal pieces may loosen or fall out during disassembly.
  • Some of the internal pieces may loosen or fall out during disassembly.

  • Firmly grasp both parts of the GravityLight body and pull them apart.

コメントを追加する

Place the back panel, the larger of the two pieces, on a sturdy surface with its back down.
  • Place the back panel, the larger of the two pieces, on a sturdy surface with its back down.

  • Unscrew the two 2cm Phillips 00 screws on the inside of the back panel.

コメントを追加する

Some of the internal pieces may loosen or fall out during disassembly. Firmly grasp both parts of the back panel and pull them apart. Firmly grasp both parts of the back panel and pull them apart.
  • Some of the internal pieces may loosen or fall out during disassembly.

  • Firmly grasp both parts of the back panel and pull them apart.

コメントを追加する

Place the middle section on a sturdy surface.
  • Place the middle section on a sturdy surface.

  • Move any wires in front of the mounting post.

コメントを追加する

Push down on the spring. The spring is very stiff. Compressing the spring requires a moderate amount of force.
  • Push down on the spring.

  • The spring is very stiff. Compressing the spring requires a moderate amount of force.

  • Push the spring and the mounting post away from the middle section and remove them from the pocket.

コメントを追加する

Pull the mounting post out of the inside of the spring Pull the mounting post out of the inside of the spring
  • Pull the mounting post out of the inside of the spring

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Jamie Forslin

メンバー登録日: 2014年09月26日

143 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team 12-2, Forte Fall 2014 Cal Poly, Team 12-2, Forte Fall 2014人のメンバー

CPSU-FORTE-F14S12G2

5 メンバー

7のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 7

今までの合計 379