はじめに

This guide will help in determining if the cooling fan is broken and how to fix or replace it.

Move the latch to the right of the battery to unlock.
  • Move the latch to the right of the battery to unlock.

コメントを追加する

Slide the latch on the left directly below the battery to unlock and pull out the battery as shown.
  • Slide the latch on the left directly below the battery to unlock and pull out the battery as shown.

  • The latch must be held in position to remove the battery.

コメントを追加する

  • Unscrew the indicated Philips screw.

    • Screw cannot be completely removed from cover.

コメントを追加する

  • Use the spudger to pry open the cover.

    • There will be three tabs on each side except for the side with the screw.

コメントを追加する

  • Unscrew the six indicated Philips screws.

    • These screws cannot be completely removed from the cooling fan component.

コメントを追加する

  • Unplug the shown cable attaching the cooling fan to the computer.

コメントを追加する

  • You are now able to remove the cooling fan.

It looks like you removed the heat sink with the fan, is it possible to remove the fan alone? How are they connected?

Alex Jansen - 返信

How do you detach the fan at the #1 screw to switch it out and put a new fan in?

Leslie Jones - 返信

まとめ

To reassemble your device, follow these instructions in reverse order.

6 の人々がこのガイドを完成させました。

Diego Carteno

メンバー登録日: 2010年04月15日

247 ポイント

7のガイドは作成済み

チーム

Cal Poly, Team 24-20, Regan Spring 2010 Cal Poly, Team 24-20, Regan Spring 2010人のメンバー

CPSU-REGAN-S10S24G20

4 メンバー

7のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 16

今までの合計 12,799