はじめに

The LCD screen will often go black and remain non-responsive. This guide will take you through the steps of replacing the broken screen and installing a new one.

Remove the two screws on the right side of the camera and the two screws on the left side. Use a small #00 Phillips flat head screwdriver. Keep all the screws in a container and the two different types separate.
  • Remove the two screws on the right side of the camera and the two screws on the left side.

  • Use a small #00 Phillips flat head screwdriver.

  • Keep all the screws in a container and the two different types separate.

コメントを追加する

Remove the three screws from the bottom of the camera. You need a three-prong screw driver for two of the three screws; keep these screws separate.
  • Remove the three screws from the bottom of the camera.

  • You need a three-prong screw driver for two of the three screws; keep these screws separate.

コメントを追加する

Remove the back by carefully flipping it open to the right side. There will be a ribbon cable attaching the front panel to the motherboard, be sure not to tear this. There will be a ribbon cable attaching the front panel to the motherboard, be sure not to tear this.
  • Remove the back by carefully flipping it open to the right side.

  • There will be a ribbon cable attaching the front panel to the motherboard, be sure not to tear this.

コメントを追加する

Pull the LCD screen to the left slightly, lift it and flip it open to the right. There is also a ribbon cable attaching the LCD screen to the motherboard, be careful not to tear it.
  • Pull the LCD screen to the left slightly, lift it and flip it open to the right.

  • There is also a ribbon cable attaching the LCD screen to the motherboard, be careful not to tear it.

コメントを追加する

Using a small flat head screw driver, flip open the black lever to release the ribbon cable. Gently slide the cable out of the lock; the LCD screen is now free to be removed.
  • Using a small flat head screw driver, flip open the black lever to release the ribbon cable.

  • Gently slide the cable out of the lock; the LCD screen is now free to be removed.

コメントを追加する

Using your index finger, guide the cable of the new screen into place. Lock it in by pushing the black lever back down.
  • Using your index finger, guide the cable of the new screen into place. Lock it in by pushing the black lever back down.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Kyle Kaczmar

メンバー登録日: 2012年02月10日

11 ポイント

1ガイドが承認済み

チーム

James Madison, Team 3-4, Klein Spring 2012 James Madison, Team 3-4, Klein Spring 2012人のメンバー

JMU-KLEIN-S12S3G4

3 メンバー

4のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 4

今までの合計 637