リペアコミュニティに参加 - アカウントの作成

はじめに

Follow this JBL Tune 500bt Speakers Removal Guide to open it

必要な工具と部品

手順1 Turn the speaker upside down

Fixing left ear no sound, Turn the speaker upside down: 手順 1、 2の画像 1

Fixing left ear no sound, Turn the speaker upside down: 手順 1、 2の画像 2

Turn the speaker upside down

翻訳

手順2 Fix springs height

Fixing left ear no sound, Fix springs height: 手順 2、 1の画像 1

Find two springs and gently pull them about one or two millimetres (approximately 1/32 to 1/16 inches for those using Imperial measurement).

翻訳

手順3 Some extra cleaning

Fixing left ear no sound, Some extra cleaning: 手順 3、 1の画像 1

It would be nice, but not necessary, to clean these two connecting pads with isopropyl alcohol for better connectivity.
That's it, you're almost done! Now, do the JBL Tune 500bt Speakers Removal Guide backwards to reasssemble and enjoy! (Putting pads back revealed in the Conclusion)

翻訳

終わりに

Ah, to put these pads back on -- push a layer into a small vertical slit on upper half of driver cover, and carefully twist it, like opening a tincan, but backwards ;))

Replace headphone pads

2 の人々がこのガイドを完成させました。