はじめに

The battery in the Epomaker Shadow-X keyboard powers its wireless functionality, enabling use. Over time, batteries can degrade, leading to shorter usage times or an inability to charge. Replacing the battery is a straightforward process that can restore your keyboard’s wireless performance. This guide will walk you through the steps to safely and efficiently replace the battery in your Epomaker Shadow-X keyboard.

必要な工具と部品

手順1 Battery

Epomaker Shadow-X Battery Replacement, Battery: 手順 1、 3の画像 1

Epomaker Shadow-X Battery Replacement, Battery: 手順 1、 3の画像 2

Epomaker Shadow-X Battery Replacement, Battery: 手順 1、 3の画像 3

Power off the Epomaker Shadow-X keyboard.
Disconnect any attached cables.

編集

手順2

Use a hex screwdriver to remove all eight screws on the underside of the keyboard.

編集

手順3

Use a plastic opening tool to gently pry open the keyboard case, working your way around each side.
Carefully separate the top and bottom covers, being mindful of any connecting cables between the two halves.

編集

手順4

Use your fingernails to gently "walk" the battery connector directly out of its socket.

編集

手順5

Use an opening tool to gently pry the battery out of the chassis.
Take care not to bend or puncture the battery.
Press the battery into place using any adhesive or mounting tabs provided with the replacement.

編集

終わりに

To reassemble your device, follow the above steps in reverse order.
For optimal performance, after completing this guide, calibrate your newly installed battery.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.