はじめに

How to remove keyboard

  1. Push open the latch and remove the battery. Push open the latch and remove the battery.
    • Push open the latch and remove the battery.

  2. Twist off the antenna. Pop off the transparent cylinder.
    • Twist off the antenna.

    • Pop off the transparent cylinder.

  3. Remove the five screws as shown.
    • Remove the five screws as shown.

  4. Pro Tech ツールキットを含むご注文、もしくは総額 $100ドル以上のご注文については送料無料です。

    当社のショップを閲覧する
  5. Carefully pry the back plate off.
    • Carefully pry the back plate off.

  6. Carefully detach golden screen connector. Carefully detach golden screen connector.
    • Carefully detach golden screen connector.

  7. Pop out the logic board with spudger. Caution: Do not touch with bare hands, use tweezers or wash hands before contact.
    • Pop out the logic board with spudger.

    • Caution: Do not touch with bare hands, use tweezers or wash hands before contact.

  8. Place the logic board on a clean tray. Place the logic board on a clean tray.
    • Place the logic board on a clean tray.

  9. Peel off the keyboard.
    • Peel off the keyboard.

まとめ

To reassemble your device, follow these instructions in reverse order.

doconnor

メンバー登録日: 2010年04月19日

25 ポイント

6のガイドは作成済み

チーム

Cal Poly, Team 10-43, Garner Spring 2010 Cal Poly, Team 10-43, Garner Spring 2010人のメンバー

CPSU-GARNER-S10S10G43

5 メンバー

12のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 1

今までの合計 1,067