パーツ

パーツは必要ありません。

  1. Slide the panel release button. Lift the panel. Lift the panel.
    • Slide the panel release button.

    • Lift the panel.

  2. Firmly press the cartridge release button with your finger. You may need to hold the cassette and/or entire device still while pressing the button.
    • Firmly press the cartridge release button with your finger.

      • You may need to hold the cassette and/or entire device still while pressing the button.

    • Lift the label tape cassette out of the device.

  3. Free shipping on all orders over $100.00 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する
  4. Use Phillips #00 Screwdriver to disengage cutter from device Remove cutter Remove cutter
    • Use Phillips #00 Screwdriver to disengage cutter from device

    • Remove cutter

  5. Use Phillips #00 screw to unscrew blade from blade cutter Carefully remove blade. The blade is sharp and can be dangerous if not handled properly. Replace blade
    • Use Phillips #00 screw to unscrew blade from blade cutter

    • Carefully remove blade. The blade is sharp and can be dangerous if not handled properly.

    • Replace blade

まとめ

To reassemble your device, follow these instructions in reverse order.

Dustin Holifer

メンバー登録日: 2014年09月25日

201 ポイント

2のガイドは作成済み

チーム

USF Tampa, Team 5-2, Mcgee Fall 2014 USF Tampa, Team 5-2, Mcgee Fall 2014人のメンバー

USFT-MCGEE-F14S5G2

4 メンバー

5のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 19

今までの合計 758