はじめに
If the attached USB cable on your Corsair Katar mouse is not working due to damage or exposed wires, this guide will show how to replace it.
必要な工具と部品
-
-
Remove the three skates on the bottom of the mouse using the plastic opening tools.
-
-
-
Use the JIS 0 screwdriver to remove the four 5 mm screws on the bottom of the mouse.
-
-
-
-
Detach the bottom of the mouse from the upper shell.
-
Use the plastic opening tool to detach the white DPI sensor cable from its port.
-
-
-
Use the JIS 0 screwdriver to remove the two 5mm screws on the motherboard.
-
-
-
Use the plastic opening tool to pry the white cable jack away from the motherboard.
-
Lift the motherboard away from the bottom of the mouse.
-
-
-
Use the JIS 0 screwdriver to remove the 5mm screw attached to the USB wire housing.
-
Lift the USB wire away from the shell of the mouse.
-
FixBotに聞いてみる
To reassemble your device, follow these instructions in reverse order.
ある他の人がこのガイドを完成しました。
チーム
UW Tacoma, Team S1-G3, Cardinal Summer 2018 UW Tacoma, Team S1-G3, Cardinal Summer 2018人のメンバー
UWT-CARDINAL-SU18S1G3
3 メンバー
13のガイドは作成済み
