メインコンテンツにスキップ

ComNet Ericsson Panther 600P Display Replacement

必要な工具と部品

  1. ComNet Ericsson Panther 600P Display Replacement, Locate the release button.: 手順 1、 3の画像 1 ComNet Ericsson Panther 600P Display Replacement, Locate the release button.: 手順 1、 3の画像 2 ComNet Ericsson Panther 600P Display Replacement, Locate the release button.: 手順 1、 3の画像 3
    • Look for the release button on the back of the radio.

    • Press the button and pull down on the battery at the same time. The battery will come free.

  2. ComNet Ericsson Panther 600P Display Replacement, Antenna: 手順 2、 1の画像 1
    • Twist the antenna counter-clockwise to unscrew it from the antenna jack.

  3. ComNet Ericsson Panther 600P Display Replacement, Dials: 手順 3、 1の画像 1
    • Pull up on the dials to remove them from the underlying pegs.

  4. ComNet Ericsson Panther 600P Display Replacement, Exterior Case: 手順 4、 3の画像 1 ComNet Ericsson Panther 600P Display Replacement, Exterior Case: 手順 4、 3の画像 2 ComNet Ericsson Panther 600P Display Replacement, Exterior Case: 手順 4、 3の画像 3
    • Using a T15 Torx screwdriver, unscrew the two screws.

    • Using a plastic opening tool, pry the internal case from the external case.

  5. ComNet Ericsson Panther 600P Display Replacement, Front Case - Internal: 手順 5、 3の画像 1 ComNet Ericsson Panther 600P Display Replacement, Front Case - Internal: 手順 5、 3の画像 2 ComNet Ericsson Panther 600P Display Replacement, Front Case - Internal: 手順 5、 3の画像 3
    • Using the plastic opening tool, pry the case apart.

  6. ComNet Ericsson Panther 600P Display Replacement, Ribbon: 手順 6、 2の画像 1 ComNet Ericsson Panther 600P Display Replacement, Ribbon: 手順 6、 2の画像 2
    • The keypad chip is attached to the motherboard by a ribbon.

    • Pull ribbon with tweezers to detach from back panel.

  7. ComNet Ericsson Panther 600P Display Replacement, Screen: 手順 7、 3の画像 1 ComNet Ericsson Panther 600P Display Replacement, Screen: 手順 7、 3の画像 2 ComNet Ericsson Panther 600P Display Replacement, Screen: 手順 7、 3の画像 3
    • Screen will be attached by a ribbon.

    • Pull screen up and away from motherboard to detach.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

5人の作成者と共同で作成されました。

Daniel

メンバー登録日: 01/13/15

109 ポイント

1ガイドが承認済み

チーム

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 2

今までの合計 209