リペアコミュニティに参加 - アカウントの作成

はじめに

Power buttons notoriously end up inside of devices if too much force is applied. This guide aims to replace the power button into it's desired location.

必要な工具と部品

手順1 Case

Chromecast Power Button Replacement, Case: 手順 1、 1の画像 1

Place the Google Chromecast face down (with text not showing) on a flat surface.
Insert a flat tool just above the micro-USB port to detach the top part of the case from the bottom.

編集

FixBotに聞いてみる

手順2

Continue prying the top of the case from the bottom toward the HDMI port until the top casing is completely removed.

編集

FixBotに聞いてみる

手順3

Remove the circuit board, lifting from the HDMI port.
The power button may become dislodged.

編集

FixBotに聞いてみる

手順4

Pry the plastic clamp from the heatsink.
Do not pry too hard to avoid breaking the clamp.

編集

FixBotに聞いてみる

手順5

Insert a plastic opening tool under the heatsink, and pry the heatsink up and out of the case.
The adhesive's strength may vary, and force should be applied gently until it becomes dislodged to avoid breaking the device.