はじめに
If you experience the E18 error, go to this site and try their solutions.
If you still experience the error, you can follow this guide to disassemble the camera and manually clean the inside of the camera and the lens.
必要な工具と部品
-
-
-
Turn off the camera by pressing the power button above the LCD screen.
FixBotに聞いてみる
-
-
-
Remove the two small screws on the bottom of the camera using a Phillips #00 screwdriver.
-
-
-
Use a Phillips #00 screwdriver to remove the two small screws on the right side of the camera.
-
-
-
-
Use a Phillips #00 screwdriver to remove the screw on the left of the camera under the A/V out digital label.
-
-
-
Use a Phillips #00 screwdriver to remove the screw on the bottom of the camera near the battery and memory card slots.
-
-
-
-
この手順で使用する道具：Dust Blower$5.99
-
Clean the lens and the area surrounding the lens with a soft brush and dust blower.
-
-
To reassemble your device, follow steps 1-6 instructions in reverse order.
ある他の人がこのガイドを完成しました。
チーム
Cal Poly, Team 9-71, Walters Spring 2011 Cal Poly, Team 9-71, Walters Spring 2011人のメンバー
CPSU-WALTERS-S11S9G71
4 メンバー
25のガイドは作成済み
