メインコンテンツにスキップ

はじめに

The three stacked rings in the lens mount ring can be safely and easily removed.

パーツ

パーツは指定されていません。

  1. Remove the two 4.8 mm black screws above the lens on the front of the camera.
    • Remove the two 4.8 mm black screws above the lens on the front of the camera.

  2. Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.
    • Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.

  3. Remove the 4.8 mm black screw on the left side of the camera.
    • Remove the 4.8 mm black screw on the left side of the camera.

  4. Remove the front panel by lifting it away from the camera's body.
    • Remove the front panel by lifting it away from the camera's body.

  5. Remove four 7.1 mm silver screws from lens mount ring.
    • Remove four 7.1 mm silver screws from lens mount ring.

  6. Remove outer mount ring.
    • Remove outer mount ring.

    • The silver button may detach.

  7. Remove thin gold ring.
    • Remove thin gold ring.

    • Correct orientation is pictured.

  8. Remove thin silver ring.
    • Remove thin silver ring.

    • Correct orientation is pictured.

  9. All rings are removed.
    • All rings are removed.

    • Follow pictures in reverse order to replace rings.

終わりに

To reassemble your device, follow these instructions in reverse order.

Antonia

メンバー登録日: 2011年04月17日

109 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 8-8, Regan Spring 2011 Cal Poly, Team 8-8, Regan Spring 2011人のメンバー

CPSU-REGAN-S11S8G8

5 メンバー

11のガイドは作成済み

コメント1件

Very handy. One addition though - the silver button lever is on the wrong side - it is not facing the mirror box but the plastic lens release button. Plus, you are missing the fact that there is a spring underneatch the silver leaver which keeps the mount pin coming back up.

Patryk Granatowicz - 返信

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 16

今までの合計 4,355