はじめに

In this guide you'll be opening the back panel of your Blu Studio, this is the first step you'll take whenever you replace or add internal parts.

If you don't have any fingernails you may want to use the plastic prying tools.

パーツ

パーツは必要ありません。

  1. Begin by making sure your Blu Studio is turned off.
    • Begin by making sure your Blu Studio is turned off.

    コメントを追加する

  2. To begin the removal of your back panel, first locate the lift tab on the bottom-right corner.
    • To begin the removal of your back panel, first locate the lift tab on the bottom-right corner.

    コメントを追加する

    • Next, gently slide your thumb (or plastic tool if you prefer) down the seem running the length of your Blu Studio until the rear panel is completely removed.

    • Your rear panel should be placed nearby and in a safe location until you are finished with your task.

    コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

6 の人々がこのガイドを完成させました。

Erik reinbolt

メンバー登録日: 2014年09月23日

1,449 ポイント

3のガイドは作成済み

チーム

USF Tampa, Team 9-1, Blackwell Fall 2014 USF Tampa, Team 9-1, Blackwell Fall 2014人のメンバー

USFT-BLACKWELL-F14S9G1

3 メンバー

8のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 8

今までの合計 2,007