Skip to main content

はじめに

Work area should be lint free, clean and well lit.

パーツ

パーツは指定されていません。

  1. Open the rear panel to expose the battery and the chassis assembly.
    • Open the rear panel to expose the battery and the chassis assembly.

    • Remove the battery.

  2. Use a small, non-marring plastic opening tool  to remove the lower-rear cover. (Credit cards and guitar picks work great)
    • Use a small, non-marring plastic opening tool to remove the lower-rear cover. (Credit cards and guitar picks work great)

  3. Use a T6 Torx screwdriver to loosen and remove the six screws from the chassis as shown. Place the screws together somewhere they will not be misplaced.
    • Use a T6 Torx screwdriver to loosen and remove the six screws from the chassis as shown. Place the screws together somewhere they will not be misplaced.

    • Flip the phone over to the front and remove the plastic bezel. (the piece that has "blackberry" written on it located directly above the screen)

  4. MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now

    MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now
  5. Remove the midframe from the back of the phone, which should now be free after removing the screws.  The green motherboard should now be exposed.
    • Remove the midframe from the back of the phone, which should now be free after removing the screws. The green motherboard should now be exposed.

  6. Remove the front-cover by carefully prying the side release tabs, located on the side of the remaining phone as circled.
    • Remove the front-cover by carefully prying the side release tabs, located on the side of the remaining phone as circled.

  7. Gently pry the side release tabs to lift the flexing keypad from the frame. The navigation ball may come loose at this point. Set it aside with the keypad for reassembly. The navigation ball may come loose at this point. Set it aside with the keypad for reassembly.
    • Gently pry the side release tabs to lift the flexing keypad from the frame.

    • The navigation ball may come loose at this point. Set it aside with the keypad for reassembly.

  8. Gently lift the motherboard.
    • Gently lift the motherboard.

    • Locate the screen's ribbon cable underneath the motherboard, and detach it from the phone.

  9. Carefully pry at the sides of the screen until the display assembly is free.  Remove the display from the motherboard unit. Insert the replacement display assembly and reverse the directions to re-assemble.
    • Carefully pry at the sides of the screen until the display assembly is free. Remove the display from the motherboard unit.

    • Insert the replacement display assembly and reverse the directions to re-assemble.

まとめ

To reassemble your device, follow these instructions in reverse order.

4 の人々がこのガイドを完成させました。

Renae Bishop

メンバー登録日: 2011年09月07日

66 ポイント

4のガイドは作成済み

チーム

Cuesta, Team 1-3, Zipperian Fall 2011 Cuesta, Team 1-3, Zipperian Fall 2011人のメンバー

CUESTA-ZIPPERIAN-F11S1G3

3 メンバー

8のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 4,039