はじめに

This guide will show you how to replace the keyboard of your BlackBerry Curve 8310.

Press down on the battery release button and slide the back cover up with your thumb.
  • Press down on the battery release button and slide the back cover up with your thumb.

コメントを追加する

Pry from the top of the battery to pull it out.
  • Pry from the top of the battery to pull it out.

コメントを追加する

Slide the metal sim card cover to the unlock position.
  • Slide the metal sim card cover to the unlock position.

  • Remove the sim card.

  • The arrows on the sim card enclosure indicate the lock and unlock positions.

コメントを追加する

Remove the two T5 Torx screws circled at the top of the phone.
  • Remove the two T5 Torx screws circled at the top of the phone.

  • The T5 Torx screws may be covered by a white sticker.

コメントを追加する

Remove the red cover at the bottom of the phone.
  • Remove the red cover at the bottom of the phone.

  • You may have to work a spudger underneath to release the plastic clips.

コメントを追加する

Be careful not to damage the front cover's plastic clips while trying to separate it from the phone. Use a spudger to pry the front cover away from the side panels. Work the spudger around the entire phone until the front cover is free.
  • Be careful not to damage the front cover's plastic clips while trying to separate it from the phone.

  • Use a spudger to pry the front cover away from the side panels.

  • Work the spudger around the entire phone until the front cover is free.

コメントを追加する

Remove the keyboard.
  • Remove the keyboard.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Mandy Chan

メンバー登録日: 2012年01月20日

88 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 10-32, Amido Winter 2012 Cal Poly, Team 10-32, Amido Winter 2012人のメンバー

CPSU-AMIDO-W12S10G32

4 メンバー

7のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 1

今までの合計 1,775