Barrel Reloading Mechanism

Unscrew all of the 12 screws on the Nerf gun.

Remove top outer shell.

Remove orange attachment tab.

Remove the screw that holds the trigger in place.

Remove the reloader trigger that is triggered by the trigger. Lol I just had to say that.

Remove the barrel that holds the Nerf darts.

Move the other parts of the Nerf gun away from the air piston and barrel rotator part.

Remove screws from the piece that is holding the barrel reloading piston in place.

Remove the piece holding the barrel reloading piston.

If your piston looks like this in the picture, you will need to either find a screw that is less than or equal to the size of one of the screws on your weapon.

Once you have found a screw, use a hot glue gun or super glue and layer it around the screw to keep it from wobbling.

It is a good idea to test the barrel reloading mechanism by pulling the barrel reloading piston back and forth. If the orange circle that attaches to the dart barrel spins then that is a good sign.

This is what your array of parts should look like.

Now put the piston back in place.

Now grab your tweezers and place the spring back in place by attaching it on the two white poles circled in red. This is something you should do if your spring fell off.