BRCK v1 Modem MicroSD Card Replacement

はじめに

This guide will show you how to remove the top cover using a hex 2.0 head driver in order to access the modem and attached microSD card. With a pair of tweezers, you will be able to remove and replace the microSD card.

必要な工具と部品

手順1 Top Cover

BRCK v1 Modem MicroSD Card Replacement, Top Cover: 手順 1、 1の画像 1

Place the face of the device showing BRCK face up.

翻訳

手順2

Remove the four screws(4mm hex head) on the corners of the device with a Hex 2.0 Screwdriver.

翻訳

手順3

Remove the top cover.

翻訳

手順4 Modem

BRCK v1 Modem MicroSD Card Replacement, Modem: 手順 4、 1の画像 1

Cut the black zip tie holding the modem down.
Caution By cutting the zip tie, you void any manufacturer warranty you may have on the device.

翻訳

手順5

Remove the connection located on the edge of the modem.

翻訳

手順6

Slightly lift the modem to reveal the brown ribbon connector and metal connection plate, located on the bottom of the modem.

翻訳

手順7

BRCK v1 Modem MicroSD Card Replacement: 手順 7、 3の画像 3

この手順で使用する道具：

Tweezers

$4.99

購入する

Using your tweezers, gently push on the metal plate and slide it down toward the base of the modem to release the locking mechanism.
Lower the plate and gently pull the ribbon out of the face plate.
Caution Be extremely gentle while preforming this step. The ribbon is brittle and prone to breaking if bent too much. Make sure you go slowly so that you do not damage the device.