はじめに

A damaged frame on an Astro A20 can be replaced easily with a 60 mm extension, Phillips #1 screwdriver, and a new frame.

パーツ

パーツは必要ありません。

  1. Place your hand on the back of the speaker.
    • Place your hand on the back of the speaker.

  2. Remove the four 7mm screws with a Phillips #1 screwdriver. You may want to use a 60mm screwdriver extension to reach the screws inside of the headset.
    • Remove the four 7mm screws with a Phillips #1 screwdriver.

    • You may want to use a 60mm screwdriver extension to reach the screws inside of the headset.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する
  4. Lift the speaker.
    • Lift the speaker.

    • Disconnect the white connector from the device.

    • Remove the wires connecting the frame shown by the yellow square.

    • Pull the black cord through the hole shown by the blue arrow.

  5. Find the top 7mm J1 JIS head screws.
    • Find the top 7mm J1 JIS head screws.

    • Remove the two 7mm J1 JIS head screws with a J1 screwdriver bit connected to a 60mm extension.

    • Pull the black cord through the frame.

まとめ

To reassemble your device, follow these instructions in reverse order.

Jasmine Yarbrough

メンバー登録日: 2018年09月10日

579 ポイント

5のガイドは作成済み

チーム

University of Alabama, Team S1-G2, Bedsole Fall 2018 University of Alabama, Team S1-G2, Bedsole Fall 2018人のメンバー

UA-BEDSOLE-F18S1G2

4 メンバー

5のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 6

今までの合計 66