リペアコミュニティに参加 - アカウントの作成

はじめに

If you are experiencing microphone problems, you may have to repair or replace the microphone. Before this can be accomplished, you must access the motherboard. This guide will show you how to do this.

必要な工具と部品

手順1 Lower Case

Astak Mole Microphone Replacement, Lower Case: 手順 1、 1の画像 1

Remove the four bottom tabs in order to access the bottom screws.

翻訳

FixBotに聞いてみる

手順2

Remove all four 14 mm Phillips #1 screws.

翻訳

FixBotに聞いてみる

手順3

Remove the SD card.

翻訳

FixBotに聞いてみる

手順4

Pry up the motherboard on the four points using a spudger.
The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

翻訳

FixBotに聞いてみる

手順5

Gently pull back the motherboard to expose many of the component's wired connections.

翻訳

FixBotに聞いてみる

手順6 Microphone

Astak Mole Microphone Replacement, Microphone: 手順 6、 1の画像 1

Remove microphone from its holder on the bottom section of the casing.

翻訳

FixBotに聞いてみる

手順7

Access microphone and assess damage.

翻訳

FixBotに聞いてみる

手順8

Remove microphone input with metal spudger. Be sure to sever electrical adhesive in order to separate input and output.
It is advised to re-apply adhesive to the cable once the new microphone cable is replaced.
The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.