メインコンテンツにスキップ

このドキュメントから答えを見つけましょう

14 の全ページを私たちが読み込んだので、あなたが読む必要はありません。今すぐ質問して、答えを手に入れましょう。

MX922 Dedicated Fax Line Setup Guide

User guide 14ページ · 415.28 KB · PDF

Dedicated Fax Line Setup Guide

MX922

Fax Easy Setup

Click $ \underline{\text{Next}} $ to step through this image-friendly version of Fax Easy Setup.

If you started Fax Easy Setup, on the fax machine's operation panel, and prefer to go through this image-friendly version...

Step 1

Press the FAX button at any screen to go to fax standby mode.

Image

ON COPY FAX FAX Memory SCAN MENU Easy setup guides you through the following procedures.

  1. Connect to a telephone line
  2. Make FAX reception settings
  3. Check FAX settings Select OK

Easy setup guides you through the following procedures.

  1. Connect to a telephone line

  2. Make FAX reception settings

  3. Check FAX settings

Step 2

Click $ \underline{\text{Next}} $ to proceed through the setup.

Image

04/09 17:55 Enter the number ScanRes. Standard Contrast Standard Status: Standby Function list TX image qity

Connecting The Phone Lines

Connecting The Phone Lines

Before

Image

O O

Wall jack

After

Image

er Wall jack

(Phone Cord included with Canon printer)

If Your Wall Plate Has Two Jacks

Use the jack that supports the fax line.

Image

2

If Your Wall Plate Has One Jack For Two Lines

If your wall jack provides one jack for two phone lines, it would be best to use a “2 Line 3 Way Adapter.” This adapter can be purchased at most stores that sell electronics. This device creates three plugs where there was one. One jack will be for your voice line. The other jack can be used for your fax transactions. In most cases, line 1 (L1) is used for phone calls; L2 is used for faxing. The third jack (L1+L2) allows access to both lines. This is where you would plug in a 2-line telephone, if available.

Image

L1 L2 L1+L2

The L1 jack is usually your

voice line

The L2 jack is usually your fax line

Fax to Phone Line Connection

First, connect one end of the supplied telephone cord to the telephone jack on the wall.

Image

Wall jack

(Phone Cord included with Canon printer)

Fax to Phone Line Connection

Next, connect the other end of the supplied telephone cord to the lower jack (labeled "LINE") on the MX922.

Image

EXT. LINE EXT. LINE EXT. LINE

(Phone Cord included with Canon printer)

Setting Up

iFixitに登録して、完全版修理ガイドを入手しましょう (14ページ)

ボットをブロックし、iFixitを人間のためのサイトとして維持するために、無料アカウントの登録が必要です。

統計データ:

過去 24時間: 7

過去 7 日: 14

過去 30 日: 14

今までの合計 14