Numark N4 Quickstart Guide

Numark

N4

QUICKSTART GUIDE ENGLISH (3–8)

GUÍA DE INICIO RÁPIDO ESPAÑOL (9 - 14)

GUIDE D'UTILISATION RAPIDE FRANÇAIS (15 - 20)

GUIDA RAPIDA ITALIANO (21 - 26)

KURZANLEITUNG DEUTSCH (27 – 32)

QUICKSTART GUIDE

CONTENTS

N4

USB cable

Power Adapter

2 software CDs

Quickstart Guide

Serato DJ Intro Overlay

Safety & Warranty Information Booklet

REGISTRATION

Please go to http://www.numark.com to register your N4. Registering your product ensures that we can keep you up-to-date with any new product developments and provide you with world-class technical support, should you run into any problems.

SYSTEM REQUIREMENTS

Serato DJ Intro Minimum PC Requirements:

• Windows 7 / Vista / XP 32-bit

• Windows 7 / Vista 64-bit

32-bit: 2 GHz Processor w/ 2GB RAM

64-bit: 2.2GHz Processor w/ 4GB RAM

• 30MB free hard drive space

Serato DJ Intro Minimum Mac Requirements:

Mac OS X 10.7.1 / 10.6.8 / 10.5.8

32-bit: 1.8GHz Intel Processor w/ 1GB RAM

64-bit: 2.2GHz Intel Processor w/ 4GB RAM

Mac OS X 10.5

• 1.8GHz Processor w/ 1GB RAM

30MB free hard drive space

1024x768 SVGA video

VirtualDJ LE Minimum PC Requirements:

• Intel Pentium 4 or AMD Athlon XP

512MB RAM (1GB Recommended)

• CD drive

• Free USB 1.1 port

20MB free on the hard drive

VirtualDJ LE Minimum Mac Requirements:

• Intel processor

Mac OS X v10.5

1024MB RAM

• CD drive

• Free USB 1.1 port

• 30MB free hard drive space

N4 AND VirtualDJ LE SETUP

INSTALL THE DRIVER

WINDOWS

Driver:

If you plan to mix video and audio, install the included ASIO4ALL driver:

1. Insert the included driver installation DVD into your computer's DVD-ROM drive.

2. Double-click "My Computer" then double-click the disc. Once the disc's contents are shown, double-click .exe file.

3. Follow the on-screen instructions to install the driver.

MAC

There is no Mac driver needed to install.

Numark

VirtualDJ LE SETUP

PC

Before you can begin using N4 with your computer, you must install the included VirtualDJ LE software:

1. Please insert the included installation disc into your computer's DVD/CD drive.

2. Open the CD to view its contents. Open the folder titled "PC." and double-click the ".Msi file".

3. Follow the on-screen instructions.

To start using N4:

1. Use the included power adapter to connect the N4 to a power outlet.

2. Connect N4 to an available USB port on your computer. (If possible, use a USB port on the rear panel of your computer.)

3. Open VirtualDJ LE by double-clicking the icon on your computer's Desktop (if you created a Desktop shortcut) or by going to Start ▶ All Programs ▶ VirtualDJ.

For more information on how to use VirtualDJ LE, please see the manual located on the disc.

Note: Full Screen video mapping is not supported in VirtualDJ LE.

MAC

Before you can begin using N4 with your computer, you must install the included VirtualDJ LE software:

1. Please insert the included installation disc into your computer's CD-ROM drive.

2. Open the CD to view its contents, open the folder titled "Mac." and double-click the ".pkg" file.

3. Follow the on-screen instructions.

To start using N4:

1. Use the included power adapter to connect the N4 to a power outlet.

2. Connect N4 to an available USB port on your computer. (If possible, use a USB port on the rear panel of your computer.)

3. Open VirtualDJ LE by going to Applications ▶ VirtualDJ.

For more information on how to use VirtualDJ LE, please see the manual located on the disc.

Note: Full Screen video mapping is not supported in VirtualDJ LE.

TIMECODE SETUP

To setup N4 Deck 1 for use with timecode (available only in VirtualDJ Pro):

1. Set the N4 rear panel USB IN REC/TIMECODE switch to 'TIMECODE'.

2. Set the N4 front panel Source switch to "PC" to avoid hearing the timecode signal beeps.

3. Adjust the Line/Phono switch to the appropriate setting and send a timecode signal through the N4 Input 3 or Input 4.

4. In VirtualDJ Pro, go to the Config menu and set the Sound Setup Inputs tab to "Single Timecode".

5. In Timecode Config, select a Vinyl preset that matches the timecode signal source that you are sending through the N4 input.

6. Adjust the settings to ensure Quality reaches 100% to control Deck 1.

To setup both N4 decks for use with timecode (available only in VirtualDJ Pro):

1. Set the N4 rear panel USB IN REC/TIMECODE switch to 'TIMECODE'.

2. Set the N4 front panel Source switches to "PC" to avoid hearing the timecode signal beeps.

3. Adjust the Line/Phono switch to the appropriate setting and send a timecode signal through N4 Inputs 3 and 4.

4. In VirtualDJ Pro, go to the Config menu and set the Sound Setup Inputs tab to "Timecodes".

5. In Timecode Config, select a Vinyl preset that matches the timecode signal sources that you are sending through the N4 inputs.

6. Adjust the settings for Line 1 and Line 2 to ensure Quality reaches 100% to control both decks.

N4 AND SERATO DJ INTRO

WINDOWS

Before you can begin using N4 with your computer, install the Serato DJ Intro software:

1. Insert the installation disc into your computer's DVD/CD drive. (Free updates to the Serato DJ Intro software are available online at http://www.serato.com. We recommend checking the website for the latest update of Serato DJ Intro before installing it on your computer.)

2. Open the CD to view its contents, open the folder titled "PC" and run the installer file.

3. Follow the on-screen instructions to install the software.

To start using N4:

1. Use the included power adapter to connect the N4 to a power outlet.

2. Connect N4 to an available USB port on your computer. (If possible, use a USB port on the rear panel of your computer.)

3. Open Serato DJ Intro by double-clicking the icon on your computer's Desktop (if you created a Desktop shortcut) or by going to:

Windows XP: Start Menu ▶ Programs ▶ Serato ▶ DJ Intro

Windows Vista & Windows 7: Windows Menu ▶ All Programs ▶ Serato ▶ DJ Intro

For more information on how to use Serato DJ Intro, please see the manual